10 Tips For A Window Coverings Makeover

You cannot stand it. The same old dreary windows that do little to add life to your home. It is time for a change. But, where do you start? How do you keep from making an expensive or embarrassing mistake? In fact, how can you know what you really want?

1.Start with one room at a time.
There may be the temptation, especially when moving into a new home, to decorate all of the rooms at once. This takes far too much energy and can sap your creative juices, leaving the decorating flat and less interesting. It can also make decorating your home an overwhelming task. Go slow. Do one room at a time and then move on to the next one.

2.Assess, review your needs.
With pen and paper in hand, jot down some notes about all of the windows in the room. Measure them and note their size and shape. Rough sketches will help. Are the windows too large? Too small? Odd sizes? Mismatched sizes? Is there too much light in the room? Not enough light? Do you want to block an unattractive view? Do you want to enjoy the beautiful view? Do you need privacy? Daytime privacy? Nighttime privacy? Or both? Do you want to liven up a dreary room? How do other family members feel about these needs? What is your budget for the windows?

3.Look for help, tips and ideas.
Seek inspiration. One thing is for certain, no matter what the challenge or situation that you are facing with your windows, someone else has already dealt with the same situation. There is a way, or many ways, to attractively treat the windows in your room. You can find examples of how others have decorated their windows in magazines, window decorating books, window decorating websites and by talking with friends and relatives.

4.Make a plan.
Using your list of needs, rank the needs in order of importance and then make a plan that addresses your needs in that order. There is a way to treat issue.

5.Address your window coverings in stages.
This is especially if you are uncertain about your preferences or if you are working on a budget. Begin with the shades, blinds or shutters. Once these are selected and installed, move to draperies or curtains, including the traverse or curtain rod. Finally, add the finishing touches such as cornices, decorative tie backs and finishing hardware.

6.Combine and contrast colors.
Using color in your window treatment is an excellent way to put life and energy as well as set the tone and mood of a room. Experiment with mixing colors from opposite ends of the color spectrum.

7.Mix fabrics for texture.
Fabric is composed of either natural or synthetic fibers and how they are woven, knitted or felted together. The type fiber and the weave or knitting will determine the texture of the material or fabric. Mixing fabrics and textures can be an excellent way to create interest and set the tone of your window treatments. For example, you may consider using velvet over organdy or silk over linen. Common fabrics for window treatments include brocade, cambric, canvas, chintz, cotton duck, crewel, damask, gingham, lace, linen, muslin, organdy, satin, silk, taffeta and velvet.

8.Mix patterns.
Mixing patterns can also liven up and set the mood for a room. Here are some tips for mixing patterns.

a. Match the scale, of the pattern to the area where it is going to be used. For example, use larger patterns on the drapes or curtains, medium patterns on valances or cornices and small patterns on accent pieces.

b. Use geometric patterns with one another. For example, you can use stripes with checks, plaids or dots.

c. Common colors in mixed patterns tie the two together. For example, blue stripes mixed with matching blue dots will tie the two patterns together.

9.Make small windows big.
Make big windows smaller. One of your goals should be to make the room harmonious. Mismatched windows or windows of dissimilar size and shape can disrupt this harmony. You can make small windows appear larger by placing a heading such as a valance or cornice on the wall above the window and using curtains or drapes of similar length. Large windows can be treated with a series of blinds or drapes breaking up the expanse. Large cathedral windows can be treated by installing a curtain or traverse rod on the lower part of the window and leaving the upper portion untreated.

10.Let your window coverings evolve.
Like a garden, the interior decoration of your home, including window treatments will be subject to change. Let your windows evolve as the interior of your home changes to reflect changes in your lifestyle or tastes. The first order for your windows is to provide privacy and light control. This will be accomplished with shades, blinds, miniblinds or shutters. Then you can begin creating mood with decorative treatments of color, design and texture. As you gain confidence and experience with decorating, you can change and expand your window treatments.

If you are tired of the same old boring drapery and curtains, now is the time to make a change. Follow these steps. Look for tips and ideas in books, magazines and websites. You are on your way to a complete window make over.

Here are some tips to help you begin your window coverings ( http://www.curtains-drapes-coverings.com/window-coverings.html ) makeover.

7 Tips For Buying An Outdoor Fireplace

Before buying an outdoor fireplace, there are several factors to take into account. Always remember that the safety of your family and property is the most important consideration.

1. Size matters

When comparing fireplaces, look at the size of the fire area before the height. If the firebox is small, wood buying and cutting is more difficult.

Requesting for specially cut wood from your supplier increases your cost.

Try to find a large firebox, donít bother with the tall and thin fireplace. A small firebowl will cost more down the road. You donít need a large fire just because you have a large fireplace, just use less wood to have a smaller fire.

A good fireplace burns more cleanly and more efficiently than a firepit design having no smoke stack. The fireplace draws air into the fire and blows out the neck for an efficient burn. Firepit designs tend to smoke and smolder much more than a traditional fireplace design because of poor airflow.

2. Proper maintenance

Fireplaces made in the more commercial copper, clay or sheet steel don't have the longevity or safety of aluminum or cast iron. Sheet metal fireplaces are available at a bargain cost. They're pretty much a disposable type of fireplace. Once metal sheet fireplaces start to rust, they have already outlived their usefulness. Check the gauge or thickness of the metal. A metal too thin might melt.

Some cast iron fireplaces have sheet metal necks. If thatís the case, check if the manufacturer has replacement parts available and cost. Frequent replacement for the neck is not what you want.

Cast iron must be maintained to prevent rust. It is a little difficult to maintain. But a well maintained cast iron fireplace will last you a long time. Also, consider the placement of your cast iron fireplace.

The cast iron fireplace tends to stain the surface it stands on.

An occasional paint job with a high temperature paint will slow down rusting. The cast iron is heavy and can stand a lot of abuse.

Copper looks great initially but after a couple of uses it tends to be green and rusty. Several companies put holes in the bottom of the firepits to drain ash and water out during rain. Firepits without holes will be filled with water when it rains.

Cast Aluminum is one of the best buys. It is easy to maintain and a long lifespan. An aluminum fireplace does not warp and only has a slightly lower melting temperature than cast iron. Cast aluminum does not rust. It is also considerably lighter than cast iron making it easier to move around.

3. Weigh it

When comparing fireplaces, check the weight. Most fireplaces are produced by weight, so they are bought by weight. Be sure that youíre comparing the same material, copper to copper or cast iron to cast iron.

4. Aluminum feature

Cast aluminum is by far a better choice for a novice outdoor enthusiast. The fireplace is easier to maintain and can be easily moved around. It may be brought to a home by the lake or stored during winter along Northern areas. Store it to prevent damage or possible theft.

5. Clay fireplace

The most disturbing problem with a clay fireplace is that it can fall apart without prior warning. When the bottom falls out, it can be quite a mess. Avoid placing your clay fireplace on a wooden deck or any surface that can easily be damaged by heat or fire. Place it on cement or tile.

If you choose to purchase a clay fireplace, take safety precautions. Use a spark arrestor and a mouthscreen for safety. The extra cost is well worth it. A clay fireplace is generally cheaper but has a shorter lifespan than either aluminum or cast iron.

6. Surround view fireplaces and raised firepits

Most surround view fireplaces are built with light materials. Surround view fireplaces are easy to tip over because of the light material used to make it. When it is tipped over, it will send ash and embers everywhere.

Safety is an issue with surround view fireplaces. Slight breezes might send embers and catch fire with flammable materials.

If you're buying a raised firepit, be sure that it comes with a lid. Otherwise, ash will be spread all over your patio when it rains.

7. What to burn

Hardwood is by far the most popular fuel for outdoor fireplaces. Pinon wood has a pleasant pine scent when burning. It keeps the flame active and generates good heat. It also helps in keeping insects away. Other fuel sources are propane, gel inserts, manufactured firelogs and natural gas.

Pine cones and applewood can be added for more aroma.

Several fireplaces come with inserts for natural gas and propane.